Multi Stage Argon Regulator 0-10 Bar
Reward Points: 0
Availability: In Stock
Ex Tax: £112.80
MULTI STAGE ARGON REGULATOR 10 BAR
Body: | Forged Brass, chemically stabilized and gold powder-painted |
First stage Bonnet: | Forged Brass, chemically stabilized and powder painted |
Second stage Bonnet: | Die-cast Zinc alloy, chemically stabilized and powder painted |
First stage Diaphragm: | Diam. 40 mm, pre-shaped stainless steel |
Second stage Diaphragm: | Diam. 82 mm EPDM fabric-reinforced rubber |
Encapsulated Valve: | Brass body sealed by PA (first stage) or high-grade chloroprene rubber (second stage) |
Pressure Gauges: | Safe design, bulkhead 50mm gauges, dual scales, accuracy class 2,5% |
Inlet Stem & Nut: | High-tensile brass, geometry complying with National standard |
Safety Valves: | On both regulator stages, non-adjustable |
Control elements: | Plastic contol knob + captive pressure adjusting screw |
Setting: | Ergonomic PA contol knob, adjustable limitation of P2 max |
Art. Nr. |
Inlet (bar) |
Outlet (bar) |
Inlet (form) |
Outlet (form) |
Flow m3/h |
0762147 | 300 | 10 | G 5/8” | G 3/8” | 48 |
GCE Multistage regulators are designed to give a level of performance that single stage regulators cannot provide. Typical applications are where;
- The outlet pressure must remain constant irrespective of changing inlet cylinder pressure.
- The system is left unattended for long periods of time
- Accuracy and fluctuation free performance is demanded
Ideally suited to manifold, dispense systems, pressure testing, and a wide range of laboratory applications, the high level of pressure control is achieved by two stage pressure reduction with the first stage reducing the inlet pressure by 90% and the large second stage diaphragm affording accurate final delivery pressure.
GCE Multistage regulators are precision manufactured, available up to 300 bar service, and complying with
EN ISO 2503. Versions are available with feature of being able to pipe away gases from the relief valve port, complying with stringent requirements of EN ISO 7291 for manifold application and operation in confined spaces.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: